Ameritrax D.W. Boogity Grill Professional Kullanıcı El Kitabı - Sayfa 8

ızgara Ameritrax D.W. Boogity Grill Professional için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Ameritrax D.W. Boogity Grill Professional 13 sayfaları. Portable barbecue & stove

Sayfayı Yazdır

FOLLOW STEPS 1,2,3, & 4.

Step 5.

CANNED GEL FUEL INSTALLATION:

Place Canned Gel Fuel on top of the installed Fuel Tray. Ignite and install COOKING GRATE.

WARNING

- NEVER install BURNER BAR when using Charcoal, Wood or Canned Gel Fuel.

WARNING

- NEVER use Charcoal, Wood or LP Gas while using Canned Gel Fuel.

WARNING

- NEVER use Charcoal, Wood, or Canned Gel Fuel while using Grill as an LP Gas Barbecue.

WARNING

- NEVER barbecue or grill foods with BURNER BAR placed in the top level position

ALWAYS install the Fuel Tray above the Burner Bar when using Grill as LP Gas Barbecue.

WARNING

- Grilling over a direct flame from the BURNER BAR will cause a fire.

FOLLOW STEPS 1 & 2.

Step 3.

BURNER BAR INSTALLATION:

Hold BURNER BAR at a 45-degree angle with

the gas vent holes and the Valve nozzle end

in down position. From inside the Grill, slide

the Valve nozzle end through the MIDDLE or

BOTTOM level END WALL slot past the END

WALL edge. Lower the opposite end of the

BURNER BAR and slide it into position on the

opposing MIDDLE or BOTTOM level END WALL

edge. Make sure that the BURNER BAR fit is secure

with each end resting firmly on the END WALL edges.

Step 4.

FUEL TRAY RACK INSTALLATION:

Hold FUEL TRAY RACK in upright position.

Insert FUEL TRAY RACK into Body at a 45-degree

Angle (into the END WALL slot directly above the

BURNER BAR) through the TOP or MIDDLE level of

the END WALL slot so that the FUEL TRAY RACK rests

securely on the edge of the END WALL. Lower the opposite

end of the FUEL TRAY RACK and slide it into place

over the opposing TOP or MIDDLE level END WALL slot.

Make sure the FUEL TRAY RACK fit is secure.

Step 5.

FUEL TRAY PLATE INSTALLATION:

With the vent hole flaps placed in the upward position.

Insert the FUEL TRAY PLATE on top of the FUEL TRAY RACK.

Press down gently to insure a snug fit.

Step 6.

COOKING GRATE:

Install COOKING GRATE.

FOR USE AS A CANNED GEL FUEL STOVE

FOR USE AS AN LP GAS BARBECUE