DoorKing 1601-295 Kurulum Kılavuzu - Sayfa 10

Otomatik Bariyerler DoorKing 1601-295 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. DoorKing 1601-295 11 sayfaları. Break-away octagon arm installation kit
Ayrıca DoorKing 1601-295 için: Kullanıcı El Kitabı (8 sayfalar)

Sayfayı Yazdır
REVERSE EDGE / RED GREEN LED INSTALLATION
This kit is designed to install on a 14 ft aluminum octagon arm for a 1601 barrier gate operator.
It CANNOT be used with a 1602 or 1603 operators.
Note: DO NOT operate arm with a malfunctioning reverse edge.

Installation

2
Slide on Spacer
Tip: Liquid soap will help
spacer slide on easier.
3
Slide on Edge
Tip: Liquid soap will help
reverse edge slide on easier.
3
Reinstall End Cap
Push a screwdriver through the hole in cap to release
spring while pushing cap on. Keep pushing cap on
until a "CLICK" is heard which locks it in place.
1601-269-G-7-21
1
Remove End Cap
Push a screwdriver through hole
in bottom of end cap to release
spring while pulling cap off.
Spacer MUST be
used or edge will
slide in slot.
10
DoorKing Part Numbers
8080-080
8080-096
Reverse Edge + Red/Green LED
Octagon Arm
Spacer MUST be used or
edge will slide in slot.
Reverse/LED Edge
Cover
Spacer
Reverse/LED Edge
120 S. Glasgow Avenue
Inglewood, California 90301
Reverse Edge
Spacer
U.S.A.