ASTRALVISION 55” Kurulum Kılavuzu - Sayfa 3

Dokunmatik ekran ASTRALVISION 55” için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. ASTRALVISION 55” 3 sayfaları. Led touchscreen

Cable Connections:

The Quick Start Guide covers the various connectors on the Touchscreen. Main cables

required are:

# Power Cable (supplied)

# USB from Touchscreen to PC for touch data (supplied)

# HDMI for video or data (supplied)

# VGA + 3.5mm for data/audio (supplied)

# Coax TV aerial cable (for TV channels)

Connectors for other cable input types (Component video, Composite video, Audio) are

avaible. There is also a 3.5mm Audio (Line Out) Out Connector that can be used for

supplementary Soundbar or other Speaker connection. There is also a USB input socket for

slideshow images.

NOTE: Any USB cable should only be run a maximum distance of 5m unless an amplifier is

used. There is almost 2m of USB cabling inside the Touchscreen, so the 3m USB cable we

supply is the maximum recommended unless you use an amplifier. A simple "Active USB

Extender", available from Computer Accessory suppliers such as Jaycar, Dick Smith, etc

should be used is an external USB length of more than 3m is required.

Similarly, we only recommend a maximum length of 10m for HDMI and VGA cables (VGA can

be run longer under good conditions). An amplified HDMI or VGA extender system, usually

using Cat 5/6 cabling, is recommended for lengths greater than 10m for optimum results.

HDMI will give a better image quality than VGA, hence why multiple HDMI inputs are included

on the input board. HDMI can be used for either data (PC) or Video (DVD, etc) inputs, and

carries both the image & audio signals.

Touchscreen Operation:

The Quick Start Guide covers the operation of the Touchscreen.

If you have any technical issues relating to the installation, contact ABI on 02.9938 6866 or

Prepared June 2014.