Astria Rhapsody54TEN Kurulum Talimatları Kılavuzu - Sayfa 8

Kapalı Şömine Astria Rhapsody54TEN için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Astria Rhapsody54TEN 10 sayfaları. 42- and 54-inch linear direct vent gas fireplaces

Sayfayı Yazdır

Install baffle (provided with fireplace)

1. With the baffle oriented as shown (Figure 20), slide the rear

tabs into the slots in the back panel.

2. While sliding the tabs into the slots, engage the front lip of

the baffle under the spring clips in the firebox ceiling.

Baffle

Figure 20: Installing the baffle

Clean porcelain panels (if applicable)

1. If applicable, use non-ammoniated glass cleaner and a soft

rag to remove fingerprints and smudges from porcelain

panels and floors.

Install optional surround

1. Attach the surround and secure it using the nine (9) screws

provided with the surround kit (Figure 21).

Figure 21: Installing optional surround

INNOVATIVE HEARTH PRODUCTS • LINEAR GAS FIREPLACES • REQUIRED AND OPTIONAL ACCESSORIES

Spring Clip

Firebox Ceiling

Tabs

Slots in

Back Panel

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.

Install glass door assembly

1. Hold the glass door assembly by the sides, and hook the

top edge to the fireplace. Then swing the bottom edge in

toward the fireplace (Figure 22).

NOTE: Be careful not to damage the glass.

2. Align the screw holes below the door assembly with

the holes in the fireplace, and secure using the (3)

provided screws.

Figure 22: Installing the glass door assembly

Attach optional bezel

1. Hook the bezel upper flange to the top edge of the glass

door assembly, and then swing the lower edge of the bezel

toward the door (Figure 23).

2. Gently push the lower edge of the bezel to attach the bezel

lower flange to the lower edge of the glass door frame.

Bezel Lower

Flange

Figure 23: Installing the optional bezel

Glass Door Assembly

Rating plate and lighting instructions

are attached to door bracket.

Bezel Upper

Flange

Glass Door

Assembly

[CROSS-SECTION]