Canon RF-S 10-18mm F4.5-6.3 IS STM Talimatlar Kılavuzu - Sayfa 16

Kamera Lensi Canon RF-S 10-18mm F4.5-6.3 IS STM için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Canon RF-S 10-18mm F4.5-6.3 IS STM 21 sayfaları.

Sayfayı Yazdır

7. Hood (Sold separately)

The custom lens hood reduces unwanted light that causes flare and ghosting and protects the front

of the lens from rain, snow, and dust.

Red dot

Attachment position mark

Attaching the Hood

Align the red attachment position mark on the

hood with the red dot on the front of the lens,

and then turn the hood in the direction of the

arrow until the red dot on the lens is aligned with

the stop position on the hood and the hood is

firmly attached.

If the hood is not attached properly, vignetting (darkening of the perimeter of the picture) may occur.

Grasp and turn the base of the hood when attaching and detaching it. There are cases in which it may

become deformed if the hood is turned with it grasped near to the rim.

Attachment position mark

Red dot

Stop position mark

Detaching the Hood

Rotate the hood in the direction of the arrow until

the hood attachment position mark is aligned

with the red indicator on the front of the lens to

remove it.

The hood can be reverse-mounted on the lens

for storage.

ENG-15