Canon EOS DIGITAL REBEL XT/350D DIGITAL Kullanım Kılavuzu - Sayfa 34

Yazılım Canon EOS DIGITAL REBEL XT/350D DIGITAL için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Canon EOS DIGITAL REBEL XT/350D DIGITAL 42 sayfaları. Expodisc custom white balance procedures
Ayrıca Canon EOS DIGITAL REBEL XT/350D DIGITAL için: İşlev Kılavuzu (5 sayfalar)

Canon EOS DIGITAL REBEL XT/350D DIGITAL Kullanım Kılavuzu
Enables Quick Control Dial switch to turn on/off Main Dial, too
P.Fn-30
This function is compatible with the EOS-1D Mark II N, EOS-1Ds Mark II and EOS-1D
Mark II.
Setting the Quick Control Dial switch to <OFF> disables the Main and Quick Control Dials.
Enlargement mode
P.Fn-30
This function is compatible with the EOS-1Ds only.
Select which part of an image is enlarged.
If you take the shot on the camera with this function [ON], you can enlarge an image.
For more imformation on using this function on the camera, refer to "P.Fn-30 Enlarging the
image" in the EOS-1Ds Instruction Manual.
If you wish to enlarge an image, set P.Fn-30 to [ON] during shooting and playback.
The image shot on the camera without setting P.Fn-30 to [ON] cannot be enlarged.
The image shot on any camera other than the EOS-1Ds cannot be enlarged.
Add original decision data
P.Fn-31
This function is compatible with the EOS-1D Mark II N, EOS-1Ds Mark II, EOS-1D Mark
II and EOS-1Ds.
The data that shows whether or not the image is the original one can be added to the image.
When selecting the display format of Shooting information (INFO), the [
captured image with Original image verification data is displayed.
For more details, refer to "Shooting Information Display" in the camera's Instruction Manual.
To verify whether the image is the original, you will need the EOS dedicated accessory Data
Verification Kit DVK-E2 (optional).
The original decision data cannot be added to the JPEG or TIFF image converted from
the RAW image.

Checking Personal Function Settings

You can check the specified Personal Functions and the status of whether or not the settings
are applied to the camera.
1
Specify the Personal Functions
2
Select the [Combination] tab.
The [Combination] tab sheet appears.
3
Check the settings.
You can check the Personal Function
settings and check if these settings are
applied on the camera.
] icon showing the
.
(p.3-8 to p.3-14)
You can load the Personal
Function settings saved on
your computer (p.3-15).
You can save the specified Personal
Function settings (p.3-15).
3-14
Cover/Table of
Contents
Introduction
1
Downloading Images
from the Camera
2
Setting the Cameras
other than the EOS-1D
Series Cameras
3
Setting the EOS-1D
Series Cameras
4
Remote Shooting
Troubleshooting
Index