Baumer OADM 20I5560/S14C Kullanıcı Kılavuzu - Sayfa 19
Aksesuarlar Baumer OADM 20I5560/S14C için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Baumer OADM 20I5560/S14C 30 sayfaları. Laser distance sensor
Ayrıca Baumer OADM 20I5560/S14C için: Manuel (2 sayfalar)
Sayfayı Yazdır
Steps / edges:
When measuring right next to steps / edges, it is important that the receiving beam is not covered by the
steps / edges. This also applies to depth measurements of holes or valleys.
Mounting above shiny surfaces:
On shiny surfaces, it is important that no direct reflection can get to the receiving optics. The reflection could
blind the sensor and produce poor results. To prevent this, the sensor may be slightly tilted. The direct
reflection can be seen on a white piece of paper when held in front of the receiver.
10 -15°
Mounting above round, shiny surfaces:
BA_OADM20x5.doc ANW_81253059
19/30
Baumer
03.07.2017
Frauenfeld, Switzerland