Baumer HMG 11 Montaj ve Kullanım Talimatları - Sayfa 38

Medya Dönüştürücü Baumer HMG 11 için çevrimiçi göz atın veya pdf Montaj ve Kullanım Talimatları indirin. Baumer HMG 11 48 sayfaları. Absolute encoder through hollow shaft

Sayfayı Yazdır

Elektrischer Anschluss / Electrical connection

7.5

Hinweis für Ex-Schutz

Vor

der

Klemmenkastendeckel(s) prüfen, ob

die

Klemmenkastendeckeldichtung

unbeschädigt ist.

7.6

Sensorkabel HEK 8 (Zubehör)

Es wird empfohlen, das Baumer Hübner

Sensorkabel HEK 8 zu verwenden oder

ersatzweise ein geschirmtes, paarig ver-

seiltes Kabel. Das Kabel sollte in einem

Stück und getrennt von Stromkabeln ver-

legt werden.

Kabelabschluss:

1 ... 3 kΩ

Blau/Blue =

Weiß/White = K1 (A+)

Braun/Brown = K1 (A-)

Grün/Green = K2 (B+)

Gelb/Yellow = K2 (B-)

Grau/Grey = Clock (Clock+)

Rosa/Pink = Clock (Clock-)

Schwarz/Black = Data (Data+)

Violett/Violet = Data (Data-)



Montage

des/der

Rot/Red = +UB

GND

7.5

Advice for Ex approval

Check that the seal of the terminal

box(es) is not damaged before moun-

ting the terminal box(es).

7.6

Sensor cable HEK 8 (accessory)

Baumer Hübner sensor cable HEK 8 is

recommended. As a substitute a shielded

twisted pair cable should be used. Con-

tinuous wiring without any splices or cou-

plings should be used. Separate signal

cables from power cables.

Cable terminating resistance:

1 ... 3 kΩ

Aderendhülsen benutzen

Use core-end ferrules

Baumer_HMG11-A-T1_II_DE-EN (19A1)

Kabelschirm

Cable shield

MB097aT1 - 11064773