Baumer HUBNER BERLIN DeviceNet HMG 10 Montaj ve Kullanım Talimatları - Sayfa 16
Medya Dönüştürücü Baumer HUBNER BERLIN DeviceNet HMG 10 için çevrimiçi göz atın veya pdf Montaj ve Kullanım Talimatları indirin. Baumer HUBNER BERLIN DeviceNet HMG 10 36 sayfaları. Absolute encoder with magnetic sensing
ELECTRICAL CONNECTION / DEVICENET
5.
ELECTRICAL CONNECTION
5.1
DeviceNet
Please ind a detailed instruction for the DeviceNet interface and the device descrip-
i
tion ile in the manual on the CD provided with the device.
5.1.1
Features
Bus protocol
Device proile
Operating modes
Preset value
Parameter functions
Diagnostic
Default settings
13/33
DeviceNet
Device Proil for Encoders V 1.0
I/O-Polling
Cyclic
Change of State
The „Preset" parameter can be used to set the encoder
to a predeined value that corresponds to a speciic axis
position of the system�
The offset of encoder zero point and mechanical zero
point is stored in the encoder�
Rotating direction:
The relationship between the rotating direction and
rising or falling output code values can be set in the
operating parameter�
Scaling:
The parameter values set the number of steps per turn
and the overall resolution�
The encoder supports the following error warnings:
- Position and parameter error
User address 00
MB252EN - 11173969, 16A1, Baumer_HMG10-DeviceNet_II_EN