Baumer Hubner HMC16 Series Montaj ve Kullanım Talimatları - Sayfa 32
Medya Dönüştürücü Baumer Hubner HMC16 Series için çevrimiçi göz atın veya pdf Montaj ve Kullanım Talimatları indirin. Baumer Hubner HMC16 Series 44 sayfaları. Encoder without bearings - incremental
Sayfayı Yazdır
SETTINGS HMCP16 / ADjUSTMENT OF THE ENVELOPE DELAy TIME OF THE FILTER
7.5
Adjustment of the envelope delay time of the filter
Adjustment of the envelope delay time of the filter (pin header 1)
The factory setting and ordered value for the envelope delay time of the filter can be set
in 3 different values via jumper positions on the pin header on the electronic board, see
section 7.2.1
Jumper position envelope delay time of the filter in µs, marked shows example of
section
6.2.6�
0
176
704
= Factory setting
7.6
Adjustment to skeleton operation
Only input 1 will be evaluated (pin header 2)�
At systems with multiple sensing (two inputs) you can switch off the second input�
Both inputs will be evaluated
(factory setting)
28/40
or
section
7.2.2�
y
1
2
304
560
1216
2240
3
0
1072
x
1
4288
Only input 1 will be evaluated
MB168T1EN - 11184527, 19A2, Baumer_HMC16-T1_II_EN