Asus AR1000 Donanım Referans Kılavuzu - Sayfa 30

Sunucu Asus AR1000 için çevrimiçi göz atın veya pdf Donanım Referans Kılavuzu indirin. Asus AR1000 32 sayfaları. Raid subsystem

• 2-15. Power Supply

The redundant power supply, located in the back of the chassis, consists of

one frame and two identical AT power modules. The LED indicators light

when both the input and output voltages are stable, and dim when either

the input or output voltage fails. A button located on the bottom-left corner

of the power supply disables the sounding of the audible alarm.

Remove all cords connecting to the failed power module. The power sup-

ply module is secured by two spring clips (as circled above) and two hooks.

To remove the power module, use a screwdriver to push in the clips and

then slide the power module out. Insert a working power supply module.

Unplug all cords connecting to the power supply unit. Remove the eight

screws securing the power unit. Remove the side panel and then push the

power unit out of the chassis.

NOTE

The alarm will sound if any of the power supply unit is not

turned on before the system is powered on.

AR1000 RAID Subsystem Hardware Reference Guide

IV. Hardware Setup

Power LED

Spring Clip (one on each side)

Power Switch

Handle

Power LED

Spring Clip (one on each side)

Power Switch

Handle

AC Power In Connector

Monitor Power Connector

Alarm Reset Button