AmpliVox SW800 Kullanıcı Kılavuzu - Sayfa 5

Hoparlör Sistemi AmpliVox SW800 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AmpliVox SW800 12 sayfaları. Battery powered pa system
Ayrıca AmpliVox SW800 için: Kullanıcı Kılavuzu (10 sayfalar), Kullanıcı Kılavuzu (8 sayfalar), Kullanıcı Kılavuzu (8 sayfalar), Kullanıcı Kılavuzu (10 sayfalar)

Sayfayı Yazdır

FUSE

FUSE: There is a fuse located in the Back Panel labeled FUSE

Detach the AC adapter cord and battery connections before replacement.

This fuse protects the AC circuitry. Use finger tips, a fuse puller or flat nose pliers to pull the fuse out. Replace the fuse

with an ATO Type (Blade Fuse—Automotive) 15 amp / 32VDC (Blue Color) fuse if needed.

Again, detach the AC adapter cord and battery connections before replacement.

If after replacing the fuse, the SW800 does not "power on", please call AmpliVox Customer Service at 800-267-5486.

AUDIO FUNCTIONS

WIRED MICROPHONE INPUTS: Two XLR type,

MIC 1 and MIC 2. Each has its own volume control that

allows you to adjust sound level of the plugged-in micro-

phone.

LINE IN INPUTS: Add pre-recorded music or audio to your

presentations from an external source. Connect using the

1/8ʺ (3.5 mm) connector. A separate LINE IN VOLUME

CONTROL is also provided for controlling sound level of the

external source.

AUDIO CONTROLS:. BASS: This control cuts or boosts the

bass level. TREBLE: This control cuts or boosts the treble

level.

LINE OUTPUT: A 1/4" connector is provided for connecting

to other equipment. LINE OUT

ternal recording device or AmpliVox S1297 Powered

Speaker. The advantage to this configuration is that the

external system's own EQ & volume settings can be sep-

arately adjusted to suit its environment and the two sys-

tems

not

EXTERNAL SPEAKER: A 1/4" connector is provided for

connecting to PASSIVE SPEAKERS (NON-POWERED).

POWER ON / OFF SWITCH

BLUETOOTH PLAYER

•

Turn Volume/Power knob clockwise to turn on Bluetooth

receiver. PWR and LINK LED's will illuminate. Will auto-

matically enter into pairing mode.

•

While in pairing mode turn on your Bluetooth device for

pairing. On your Bluetooth menu look for "Portable PA".

May ask to use Pincode# 0000. Once paired the PWR

and LINK LED's will remain on.

can be used to drive an ex-

interact

with

each

(SEE PAGE 4).

other.