Amptone Lab XY MIDIpad Kullanıcı Kılavuzu - Sayfa 10

Kayıt Ekipmanları Amptone Lab XY MIDIpad için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Amptone Lab XY MIDIpad 12 sayfaları. Xy midipad midi controller user's manual

Sayfayı Yazdır

1. Installation

seconds. Kaoss Pad will quit the MIDI Edit mode few

seconds after saving the settings.

Note: Kaoss Pad 2 has 100 programs, whilst the Kaoss Pad

3 has 128 programs. Because of this, it is possible to

overshoot the program control. If KP2 no longer responds to

the Program Change message, keep turning the encoder

until it starts changing the programs again.

2. KORG Kaoss Pad 3

XY MIDIpad uses standard settings of the Kaoss Pad. If

your device hadn't had its settings changed you don't need

to follow these instructions.

Hold the SHIFT button and press 5 (MESSAGE). Using the

PROGRAM/BPM knob, choose GL.Ch and press the

PROGRAM/BPM knob. The currently chosen channel will

be displayed. Using the PROGRAM/BPM knob, choose

channel 1. Press TAP/RANGE. Using the PROGRAM/BPM

knob choose Pad X and assign number 12 to it. Do the

same thing for Pad Y and PAD touch (assign 13 and 92).

Press TAP/RANGE. Finish the operation by pressing

WRITE.

3. DigiTech Whammy 4

Whammy must be set to receive messages on the 2

channel. To do so, first disconnect the power from the

Whammy pedal. Then press and hold the footswitch while

reconnecting the power. One of the Preset LEDs will begin

to flash indicating the currently selected MIDI channel.

Rotate the knob to select Deep preset from Detune group

which stands for the 2

channel. Press the footswitch

again to exit the MIDI set up menu and apply the change.

4. MIDI instrument/synthesizer

If you want to use XY MIDIpad with MIDI instrument, you

need to set it to receive messages on the 3

channel. In

order to find out how to do it, you need to read the manual

attached to the device or, in case of software instrument,

read the application/plugin documentation.