AMR 64 Kullanım Talimatları Kılavuzu - Sayfa 2
DJ Ekipmanları AMR 64 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. AMR 64 7 sayfaları.
Sayfayı YazdırGetting Started
Enclosed in the shipping carton, you should find the following:
1 AMR™ 64 Mixer
1 wall mount power supply with cord and connector
1 Operating Instructions brochure
Connecting Power to the AMR 64
Connect the wall mount power supply to a nearby AC power
outlet. It is wise to see that audio signal lines are not near the
power transformer (to prevent hum pickup). Power then can be
applied to the mixer by turning on the front panel power switch.
Connecting Signal Lines to the AMR 64
There are various system setups in which the AMR 64 mixer
may be used, all of which cannot be covered in this operating
instruction sheet. For a guideline, you will find a line drawing
below that indicates where various pieces of equipment are con¬
nected to the AMR 64 mixer.
NOTE: All equipment that is connected to the AMR 64 mixer in
the below line drawing is "line level," with exception to the micro¬
phone signals. Be careful when connecting your mixer to other
equipment that you do not connect it to any microphone inputs
on such equipment (use line level inputs and outputs only).
Rack Mounting the AMR 64
The AMR 64 may be rack-mounted, if desired, with the acces¬
sory rack mount kit. See your AMR dealer and ask for a RM™ 64
rack mount kit.
The AMR 64 is a compact mixer that features six inputs with
four channel and simultaneous stereo outputs. The features and
functions have been optimized for speed and flexibility in making
high-quality multi-track recordings. The AMR 64 incorporates
many features found on large mixing consoles such as input
channel patching, separate monitor mixer, sweepable equaliza¬
tion, etc. As you become familiar with the operation of the AMR
64, you will grow to appreciate the attention to detail that makes
this an exceptional mixer.
Each input channel features low impedance XLR microphone
inputs, line level channel "insert" patching (mic preamp output
and line input), mic/mute/tape switch, input gain control, three-
band equalization (fixed high and low frequencies and a sweepa¬
ble midrange), auxiliary send, linear level control, pan pot and
output assignment switch, in addition to a peak reading LED to
indicate an overload condition on that specific input.
The AMR 64 features a separate (4 x 2) monitor mixer that will
allow you to have all input channels free during the overdubbing
process. Typically, pre-recorded tape tracks are brought back
through the normal input channels for monitoring purposes dur¬
ing overdubbing. In addition, the monitor mixer can be used as
four additional line inputs during the mixdown process (provid¬
ing a total of ten line inputs).
There are many more features that are incorporated on the
AMR 64. As you read the detailed explanation of each feature,
you will soon grow to appreciate its well thought out features and
design.