Advanced Diagnostics AD90 Kullanım Kılavuzu - Sayfa 10

Disk Çoğaltıcı Advanced Diagnostics AD90 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Advanced Diagnostics AD90 18 sayfaları. Transponder duplicating system

Sayfayı Yazdır
www.OBD2express.co.uk
3.0 CRYPTO TRANSPONDER
INTERFACE
If a problem is detected, the red LED will indicate a fault code by blinking. The
number of times the LED blinks denotes what the fault code is, please refer to the
chart below:
Blinks
1
2
3
4
The transponder seems to be OK but the data does not meet
5
6
7
8
9
10
11
The transponder seems to be OK but the data does not meet
12
13
14
8
Communication error
Check all connections and make sure devices are on
Transponder not found
Check that the transponder is in the AD90 key reader
Wrong transponder.
Swap it to a PHILIPS PCF 7935 / 79935, 42 ID
Wrong transponder data
the Philips 42 standard
Incorrect command to the AD90
Disconnect and re-connect all devices
Wrong AD90 software version
Version must be 3.14 or higher
Wrong data sent by AD90
Repeat the procedure
You took to long to press a key
Transponder cannot be decrypted
Contact your distributor
Not enough memory
Data too large, use a different transponder and repeat
Incorrect transponder data
the Philips 42 standard
Wrong data sent to AD90
Repeat the procedure
Communication error
Check all connections and make sure devices are on
Communication error to AD90
Check all connections and make sure devices are on
Description
Time Out
procedure