Advanced ICE 1469 Kurulum Kılavuzu
Otomobil Aksesuarları Advanced ICE 1469 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Advanced ICE 1469 9 sayfaları. Ford ranger/everest camera integration
Sayfayı YazdırFord Ranger/Everest Camera
Integration Installation Guide
1469
PLEASE READ BEFORE BEGINNING INSTALLATION
Installation Terms & Conditions
•
All labels on the product including software versions and serial numbers must not be covered, damaged or removed. This
may void the warranty on the product.
•
Ensure that all left over accessories, including remote controls and cables, are kept for future use. If
replacements are required in the future they will not be provided free of charge.
•
Please ensure the installation of this product will not interfere with any factory safety equipment (e.g. Airbags).
•
If working with Airbags, be sure to disconnect the vehicle Battery before beginning work. This product and the following
instructions are designed for installation by a qualified 12v installer, car audio installer or auto electrician.
•
Interfaces and Navigation modules must not be installed in a location where they will be exposed to extreme
temperatures including, but not limited to, installation on top of a vehicles radio, transmission tunnel or firewall.
Damaged caused by exposure to heat is not covered under warranty.
Overview
This is a completely plug and play system and has been designed for the following vehicles and features:
2022 - Current Ford Ranger and Everest with the Sync 4A 12 Inch Screen. This system allows for the addition of up to four (4)
cameras to the factory screen
Important Product Information
•
This product comes with a 2 year warranty against manufacturer related defects. Please read the included
warranty card and register the device on the Advanced ICE Pty Ltd website.
•
This installation manual covers a range of products and vehicles.
Contents
Page 1
1469_INS_V1.1
2
2
2
2
3
4
4
4
5
5
6
7
8
9
9