Bosch Programme Table Kurulum ve Kullanım Talimatları Kılavuzu - Sayfa 16

End of the programme

Childproof lock

The washing and drying programmes are ended automatically.

appears on the display panel.

Set the program selector to Off.

Remove the washing from the drum.

Leave the door open so that the inside of the washer-dryer can dry out.

Turn off the tap (not necessary on models with Aqua-Stop).

If the spin function was deactivated at the start of the wash cycle,

Rinse

$ (no final spin = laundry remains in last rinsing water), the washing

programme is automatically stopped after the final rinse. The display

panel shows

In order to drain the rinsing water and, if required, spin the laundry:

Press the B (Spin) button repeatedly until the required spin speed is

set. The water is drained and the washer-dryer spins the laundry. The

programme is completed when

The maximum spin speed depends on the selected wash programme.

If you do not wish to spin the laundry:

Set the spin speed to $ (Rinse hold) . The water is drained, but the

washer-dryer does not spin the laundry. The programme is ended

when

Set the program selector to Off.

Remove the laundry.

Leave the door open so that the inside of the washer-dryer can dry out.

Turn off the tap (not necessary on models with Aqua-Stop).

For preventing the washer-dryer functions that you have set from being

changed inadvertently.

Activate/Deactivate: Press the option and set buttons at the same time

to activate or deactivate the childproof lock. When the childproof lock is

activated, @ lights up on the display.

alternating with

appears in the display field.