Bosch WTA74202ID Kurulum ve Kullanım Talimatları Kılavuzu - Sayfa 15
Kurutucu Bosch WTA74202ID için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları Kılavuzu indirin. Bosch WTA74202ID 40 sayfaları.
Sayfayı Yazdır
Installation for the exhaust air
duct
Caution!
Damage to the appliance
Inappropriate connecting of the exhaust
air duct to the dryer may cause
damages to the appliance. In order to
avoid it follow advises included in this
chapter.
Notes
It is recommended to route the
■
exhaust air directly into the open air
through an exhaust air duct. A drain
check valve must be fitted then to
prevent air from flowing back.
The air extraction system must not
■
exceed the specified pressure
losses.
Clean the exhaust air duct regularly,
■
at least once a year.
When operating the dryer without an
exhaust air duct, the following must
also be observed:
Ensure that the room is well
■
ventilated, otherwise energy
consumption and drying time will
increase. Bad ventilation of the room
may lead to the increase of moisture
which may cause damages, e.g. to
walls or furniture.
Do not cover the exhaust air
■
opening. Leave approx. 1 m of free
space around the exhaust air
opening.
Installation and connection
Connections on the dryer
Connections for an exhaust air duct are
located:
on the back panel
■
The exhaust air opening on the back
panel is open when the dryer is
delivered (bayonet ring). The
exhaust air opening on the left side
panel is sealed with a cover.
on the left side panel
■
You can switch the connection on the
back panel to the left side panel as
follows:
Remove the cover on the side panel.
1.
Remove the bayonet ring from the
2.
back panel and attach it to the
opening on the side panel.
en
15