Atim Cloud Wireless ACW/LW8-THM-I Kullanıcı Kılavuzu - Sayfa 8
Aksesuarlar Atim Cloud Wireless ACW/LW8-THM-I için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Atim Cloud Wireless ACW/LW8-THM-I 14 sayfaları. Temperature & humidity sensor
b. Assembly and disassembly
The box is mounted on a flat,
vertical wall. Place and fix the back
of the box on the wall following the
direction indicated by the arrows on
the back. Use Ø 5 mm screws.
The holes of the cover must be on
the right side, in the same direction
as the picture on the right.
Match the pivots at the top of the
case base with their respective
locations on the back panel.
To remove both sides, place a
screwdriver in one of the two
mounting areas at the bottom* of
the front panel and press inward
until the base cover is released.
WARNING
It is imperative to open the box from the bottom; opening from the top can damage the circuit.
60mm
ATIM_ACW-THM_UG_EN_V1.3
LED
Bouton poussoir
NOTE IMPORTANTE
Pour mettre le produit sous tension,
appuyez sur le bouton poussoir
pendant 2 secondes, la LED doit
clignoter 3 fois pour indiquer le
passage en mode exploitation.
7