Electrolux DD9691-M Kurulum ve Kullanım Talimatları Kılavuzu - Sayfa 10
Havalandırma Davlumbazı Electrolux DD9691-M için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları Kılavuzu indirin. Electrolux DD9691-M 20 sayfaları. Built-in- flat-screen fume extractor hood
Sayfayı Yazdır
Mounting the hood body
• Before attaching the hood body, tighten the two screws Vr lo-
cated on the hood body mounting points.
• Hook the hood body onto the screws 12a.
• Fully tighten support screws 12a.
• Adjust screws Vr to level the hood body.
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the
chimney using either a flexible or rigid pipe ø 150 or 125mm, the
choice of which is left to the installer.
To install a ø 150
• To install the dumper 10a.
• Fix the pipe in position using sufficient pipe clamps (not
supplied).
To install a ø 125
• To install a ø 125 mm air exhaust connection, insert the redu-
cer flange 9 on the dumper 10a.
• To install the Adapting ring 10b.
• Fix the pipe in position using sufficient pipe clamps (not
supplied).
• Remove any activated charcoal filters.
EN
Connections
2 20