Atlas PA601 Broşür ve Teknik Özellikler - Sayfa 7
Amplifikatör Atlas PA601 için çevrimiçi göz atın veya pdf Broşür ve Teknik Özellikler indirin. Atlas PA601 10 sayfaları. Atlas sound infrared repeater system & devices
Ayrıca Atlas PA601 için: Kullanıcı El Kitabı (16 sayfalar), Broşür (2 sayfalar)
Sayfayı Yazdır
CP700 / CP400
•
Commercial Duty Stereo Power Amplifiers
•
Two High Quality Internal Toroidal Transformers Provide Isolation in 25V, 70.7V, 100V Stereo or 140V / 200V
Bridge Mode Operation
•
30-Position Rear Panel Stepped Input Gain Controls
•
Terminal Block and XLR Input
•
Automatic, Dual Speed, High Efficiency Fan Cooling
•
Short Circuit, Thermal, and DC Offset Protection
•
UL Listed
Professional grade audio power amplifiers specifically designed for demanding contractor applications feature an
esoteric grade toroidal power supply and output transformers. These transformers were chosen for their outstanding
reliability as well as extended frequency response (-3 dB @ 30 Hz - 70.7V output through transformer). Now you can
have the peace of mind that systems will have true transformer output isolation, a feature that previously may have
not been affordable due to the cost of quality external transformers. Independent channels are driven by separate
power supplies to ensure maximum channel separation and ultra low distortion figures while providing years or
faithful service. Whether your application is a large distributed constant voltage sound system or a high SPL sound
reinforcement system, the Atlas Sound
CP400 & CP700 certified by ETL to UL 813 standard.
CP700 / CP400
CP400
Outputs (Below)
Power Rating (Below)
25V Stereo*
175 watts x2
70.7V Stereo*
200 watts x2
100V Stereo*
200 watts x2
140V Bridged Mono*
400 watts
200V Bridged Mono*
400 watts
8 Ω Stereo**
160 watts x2
4 Ω Stereo**
240 watts x2
2 Ω Stereo**
270 watts x2
8 Ω Bridged Mono***
500 watts
4 Ω Bridged Mono***
600 watts
Inputs
Balanced/Unbalanced 20k / 10k Ω
Frequency Response
Direct Outputs (±3 dB) 30 Hz – 50 kHz
Transformer Outputs (±3 dB) 30 Hz – 16 kHz
Distortion
8 Ω, 1 kHz, 240 watts per channel < .05%
Signal To Noise
8 Ω per Channel @ 240 watts > 100 dB
Dimensions
3 RU,
Height: 5.19 (132 mm)
Width: 18.9" (480 mm)
Depth: 16.85" (428 mm)
*Max Average Power @ 35 Hz – 20 kHz with 0.1% THD (10 – 80 K Filter)
**0.1% THD
*** 1 kHz, 1% THD
800.876.3333
Amplifier Accessories
is the perfect answer for high power / low cost amplification needs.
CP Series
CP700
280 watts x2
350 watts x2
350 watts x2
700 watts
700 watts
240 watts x2
400 watts x2
550 watts x2
850 watts
1100 watts
CP700
63