AirTechnic AHB 32 B Kullanıcı Kılavuzu - Sayfa 12

Isıtıcı AirTechnic AHB 32 B için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AirTechnic AHB 32 B 15 sayfaları.

"TIMER OFF" button

1. Press the "TIMER OFF" button and the symbol "OFF" will appear (as shown in picture 6-1).

2. Press "up" or "down" button to adjust the hour (as shown in picture 6-2).

3. Press the "Timer OFF" button again and the minutes flash. Press "up" or "down" button to adjust

the minutes (as shown in picture 6-3).

4. Press the "Timer OFF" button again and the setup finalizes. It will show the current time, for

example 16:30 and the "OFF" symbol (as shown in picture 6-4).

10. IMPORTANT NOTES BEFORE 1

Items to be checked

Is the installation stable?

Is the heat insulation adequate?

Is the power voltage compatible

according to the specifications?

Are all wire connections correct?

Is the ground wiring properly connected?

Is the wiring correct

according to regulations?

Due to thermal expansion and contraction, the heater would make noise when turned on

or off. It's a normal phenomenon and won't affect the operation or efficiency of the heater.

11. SAFETY NOTES BEFORE OPERATION

1. Do not connect the power supply before the installation is completed.

2. All wire connections are correct and secure.

3. No scattered objects are on the heater's body.

4. Connect power and check if the heater is operating properly.

Infrared Heater AHB

OPERATION

Situation caused

by improper installation

The equipment may fall off or shake.

Damage to objects in close proximity.

Equipment failure.

Electricity leakage

that can cause damage or injury.

Equipment failure or circuit damage.