Atlas Copco PH 240 D Onarım Talimatları - Sayfa 4

Matkap Atlas Copco PH 240 D için çevrimiçi göz atın veya pdf Onarım Talimatları indirin. Atlas Copco PH 240 D 8 sayfaları.

Dismantling the

Remove the brush holders (1) from the

motor

machine. Remove the screw of the

retaining clip (8). Remove the retaining

clip and the carbon brushes.

Remove the gear case from the motor

housing.

Remove the complete motor from the

armature (4). Remove the gear.

Expel the armature (4) from the gear case

with aid of a plastic hammer.

Remove the screws and the cover (6) with

the gasket. Lever off the piston together

with the connecting rod (5).

Unscrew the eccentric wheel shaft (7) and

hit it until it comes free. If necessary, use

a plastic hammer.

Separate the eccentric, the bearing, the

ball bearing, the locking ring, and the

pinion from the eccentric wheel shaft (7)

by pressing.

Lever off the air conduction ring (2).

Lightly hit the electric field (3) to remove it.

Dismantling the

Unscrew and dismantle the pair of handle

On/Off switch

shells (1).

Unscrew and dismantle the switch (3), the

capacitor (2), and other electric parts.

Repair Instructions No. 162.11/95

PHD 26/ PH(D) 38/ PH 240 D/ PH 350 (D)

PAGE