Bose SoundLink Bluetooth speaker III Kullanıcı El Kitabı - Sayfa 13

Konuşmacılar Bose SoundLink Bluetooth speaker III için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Bose SoundLink Bluetooth speaker III 20 sayfaları. Charging cradle
Ayrıca Bose SoundLink Bluetooth speaker III için: Kullanıcı El Kitabı (20 sayfalar), Manuel (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (6 sayfalar), Sss (4 sayfalar), SSS (2 sayfalar)

Sayfayı Yazdır
Bose SoundLink Bluetooth speaker III Kullanıcı El Kitabı

Connecting a device using the AUX connector

You can use your speaker with any device that features a headphone or audio
output. This feature requires using a stereo audio cable with a 3.5 mm plug on
one end to connect to the AUX IN input
available for purchase at electronics stores.
To use the AUX IN connector:
1.
Plug the cable from your audio device into the AUX IN connector
back of the speaker.
2.
Press Power
AUX
3.
Press
on the speaker.
4.
Adjust the volume on the connected device to near maximum, then use
the speaker volume buttons to adjust the volume level.
Notes:
If the connected device stops playing audio for 30 minutes, the speaker
automatically turns off to conserve battery power.
The SERVICE connector on the back of the speaker is only for software updates.
It cannot be used to connect an audio device.
on the speaker.
on the speaker. This type of cable is
Operation
on the
English - 13