Bose Solo 15 series II Servis Kılavuzu - Sayfa 36
Stereo sistemi Bose Solo 15 series II için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Bose Solo 15 series II 40 sayfaları. Tv sound system
Ayrıca Bose Solo 15 series II için: Önemli Güvenlik Talimatları Kılavuzu (20 sayfalar), SSS (3 sayfalar)
Sayfayı Yazdır
Input Test (continued)
4.5 Apply a 200 Hz, 25 mVrms signal to the left
and right input of the A/D converter.
4.6 Connect the A/D converter Coax output to
the unit's Coax input.
4.7 Listen for clean, undistorted audio from the
unit.
4.8 Apply a 200 Hz, 25 mVrms signal to the left
and right input of the A/D converter.
4.9 Connect the A/D converter Optical output to
the unit's Optical input.
4.10 Listen for clean, undistorted audio from the
unit.
5. Auto Select
This is only needed if the input test is performed
with all inputs connected. Otherwise, the unit's auto
select circuit will select just the Optical input - the
highest performance signal. The auto selection
sequence is Optical, Coax, Analog.
5.1 Issue the TAP command "remote 0" to turn
the unit on, or press the remote ON button.
5.2 Issue the TAP command "VO 100" to set the
volume to maximum level.
5.3 Issue TAP command "audio auto, 0" to dis-
able auto input selection.
5.4 Apply a 70 Hz, 50 mVrms signal to the left
and right analog input.
5.5 Issue TAP command "audio input, 0" to se-
lect the Analog input.
5.6 Apply a 70 Hz, 50 mVrms signal to the left
and right input of the A/D converter.
FUNCTIONAL TEST PROCEDURES
5.7 Connect the A/D converter Coax output to
the unit's Coax input.
5.8 Issue TAP command "audio input, 1" to se-
lect the Coax input.
5.9 Connect the A/D converter Optical output to
the unit's Optical input.
5.10 Issue TAP command "audio input, 2" to
select the Optical input.
5.11 Perform Step 6 for pairing.
5.12 Issue TAP command "audio input, 3" to
select the Bluetooth input.
5.13 Issue TAP command "audio auto, 1" to
enable auto input selection before returning the
unit to the customer.
6. Bluetooth Test
For this test, use a Cell phone with A2DP Bluetooth,
such as an iPhone
®
Profi le) Pair Bose
®
system device.
6.1 Plug in the power to the unit and turn on the
Bose
Solo 15/10 Series II TV sound system
®
6.2 Press the Bluetooth button on remote until
the LED blinks white to make the unit discover-
able.
6.3 From the Bluetooth device list, select the
device named "Bose Solo system". Once paired,
the LED on the unit should turn a solid white.
Note: If you are prompted for a pass code, enter
0000.
6.4 Play a familiar audio track from the Bluetooth
device.
6.5 Listen for a clean undistorted sound with no
audio drop outs.
36
(Advanced Audio Distribution
Solo 15/10 Series II TV sound