Bose FreeSpace ZA 250-LZ Kurulum ve Kullanım Kılavuzu - Sayfa 25
Amplifikatör Bose FreeSpace ZA 250-LZ için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. Bose FreeSpace ZA 250-LZ 44 sayfaları. Rack mount kit for amplifiers
Ayrıca Bose FreeSpace ZA 250-LZ için: Kurulum ve Kullanım Kılavuzu (22 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)
Sayfayı Yazdır
Setup and Operation
pro.Bose.com
Remote Control connections
Remote volume and source selection control
The amplifier is designed to work with the Volume Control with A/B Select User Interface (PC 041967) accessory� The
REMOTE connector on the rear panel of the amplifier is labeled to match the connector on the user interface� Use the
included 4-pin Euroblock�
Volume Control with A/B Select User Interface
See the Bose
Volume Control with A/B Select User Interface install guide for more details.
®
The amplifier also can be controlled with a linear taper 10k ohm potentiometer (full CCW=0 ohm, full CW=10k ohm) and
SPDT switch�
Volume Control with A/B Select
Note: The Bose Volume Control User Interface (PC 041966), not shown here, is not fully functional with the IZA 190-HZ
and IZA 250-LZ amplifiers�
Mute with standard contact closure
The amplifier is designed to mute all outputs (including AUX OUT) when a trigger is detected via the MUTE connector�
This is triggered from a standard contact closure� Use the included 2-pin Euroblock�
AC power connection
Once all the input and output connections have been made on the rear panel, connect the amplifier to AC power with
included power cord�
English
Installation and Operation
Page 25