Anova CC251T Talimatlar Kılavuzu - Sayfa 12

Çim Biçme Makinesi Anova CC251T için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Anova CC251T 19 sayfaları.

WARNING: Carry out the adjustment operations with the motor and cutter stopped.

7. OPERATING INSTRUCTIONS

Service the engine with gasoline and oil as instructed in the manual that is packed with your mower. Please

read the instructions carefully.

WARNING:Gasoline is highly flammable.

Store fuel in containers specifically designed for this purpose.

Refuel only outdoors, before starting the engine and do not smoke while refueling or handling fuel.

Never remove the fuel tank cap or add gasoline while the engine is running or when the engine is hot.

If gasoline is spilled, do not attempt to start the engine, move the machine away from the spill area and avoid

creating any source of ignition until the gasoline vapors have dissipated.

Replace all fuel tanks and container caps securely.

Before tipping mower to maintain blade or drain oil, drain fuel from tank.

WARNING:Never fill the fuel tank indoors, with the engine running, or until the engine has cooled for at

least 15 minutes after running.

7.1 TO START THE MOTOR AND ENGAGE THE CUT

1. Unit is equipped with a socket on the spark plug end, make sure the metal loop on the end of the spark

plug wire (inside the socket) is secured over the metal tip of the spark plug.

2. When starting the cold engine, turn the throttle lever to the position

When warming up the engine while running, turn the throttle lever to the position

3. Stand behind the unit, grasp the brake control handle and hold it against the upper handle as shown in

Figure 9B.

4. Hold the starter handle as shown in Fig.9B and lift it up quickly. Slowly return it to the rope guide bolt after

the engine starts.

Release brake control handle to stop motor and blade.

Fig.9A Fig.9B

Start the engine carefully according to the instructions and with your feet well away from the blade.

Do not tilt mower when starting engine. Start the mower on a level surface free of tall grass or obstacles.

Keep hands and feet away from rotating parts. Do not start the engine when it is standing in front of the

discharge opening.

7.2 OPERATING PROCEDURES

During operation, hold the brake handle firmly with both hands.

. (Fig.9A)