AtVideo DR-6232H Hızlı Kılavuz - Sayfa 12

DVR AtVideo DR-6232H için çevrimiçi göz atın veya pdf Hızlı Kılavuz indirin. AtVideo DR-6232H 15 sayfaları. Hybrid network video recorder

Device Registration

To use the functions provided by iRAS, you must first

Select System > iRAS Setup > Device in the menu at

the top of the screen.

On the Site panel, click on All Devices, then click on

the

button at the bottom of the Site List panel on

the right. A Device Scan window will appear on the

screen.

After selecting a scan mode, click on Start Scan button

and the scan results will be displayed on the list.

Click Add Devices at the bottom of the Device Scan

window.

When user authentication window appears, enter the

User ID and Password set up on each device, and then

select OK for remote access.

Click Device Group on the Sites panel and click

the bottom. Add Device Group window will appear.

● Name: Enter a name for the device group.

● Location: Select a location for the subject device

group.

When you select a device from the device List on the

left, it will be added to the Selected Device List on

the right. Click OK to register the device group.

Make sure that the device has been added to the

device group correctly. Click Device Group on the

Sites panel and click on next to Device Group. When

you click on a registered device group, a list of devices

added the selected device group will be displayed on

the right.

To modify a device group that has been registered,

select a device group and click

the Sites panel. Modify Device Group window will

appear. You can modify the selected device group

from this window.

In the Site List, make sure that the device has been

added to the device group.

In the panel tabs, click the Live tab. In the Site list,

select a zone you wish to connect to. Then, drag &

drop the selected site on the Live screen using your

mouse. The live video of the selected site will be

displayed on the screen.

on the bottom of