ATW MINI 8 Kullanıcı Kılavuzu - Sayfa 13
Isı Pompası ATW MINI 8 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ATW MINI 8 18 sayfaları. Air-to-water heat pump
Sayfayı Yazdır10.2.9 Network setting
It is possible to set the IP address, subnet mask and gateway of the network so that the devices can be connected to
the network. If the installation permits, it is possible to activate the DHCP server.
Note: If you dont know what value to set, do not make any changes, or connect the panel to the network. Please
consult your network administrator.
To set the desired value, click on the item you want to edit. The value can be changed using the up and down
arrows. By pressing the Back button, the setting will be saved and the screen will return to the Settings menu.
10.2.10 Backlight setting
To adjust the backlight of the display, highlight the item you want to edit. The value can be changed using the up
and down arrows. By pressing the Back button, the setting will be saved and the screen will return to the Settings
menu.
Backlight
(external power)
Backlight
(battery supplied)
Available backlight time lengths:
- on (----), 10 seconds, 30 seconds,1 minute, 2 minutes.
DHCP deactivated:
DHCP activated:
13
Changing the value
up and down
Save and return to
the Settings menu
Changing the value
up and down
Save and return to
the Settings menu