ATW AirDew AD-5 Kullanıcı Kılavuzu - Sayfa 12

Su Sebili ATW AirDew AD-5 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ATW AirDew AD-5 16 sayfaları. Atmospheric water system

Self-Error detection function

In case of error during operation 2digits on the temperature/humidity

indicator show ERROR signals respectively. Turn off and unplug unit.

Wait few seconds and Plug In and Turn On again. If the ERROR

signal continues to light up, turn unit off and call the Service Centre

- Cold temp. sensing failure (Er / S1)

- Room temp. sensing failure (Er / S2)

- Fan motor failure (Er / Fn)

- Control board failure (Er / Cn)

- Pump failure (Er / BP)

Generating water indicator

- Dropping motion becomes active : Unit is now generating water

- Icon is in hold motion : Unit is in pause cycle

- No icon showing : Water generating function has stopped.

See Menu/Set button function

Water level indicator

- Shows level of water in top tank.

- If water level sensor is incorrect, text will start blinking and bars light

up intermittently

Refresh indicator

- Icons rotating clockwise : Unit is in re-circulation cycle.

U.V indicator

- Replacement of U.V indicated by red text light.

install new U.V and reset the U.V indication function by the Menu/Set

button (see page 13). Yellow light text will appear

- If both the U.V icon and U.V text blink : Check if U.V. light or ballast

has a problem

Notes : U.V is most important to keep water clean and pure. If both the

icon and text are blinking continuously, call the Service Centre

immediately.