Anyload NPS Series Operatör El Kitabı - Sayfa 10

Terazi Anyload NPS Series için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Anyload NPS Series 12 sayfaları. Pallet jack scale

2. If zero correction or zero calibration is needed, enter [ 0000.0] as the

calibration weight then proceed the calibration. It will return to

weighing mode.

6. Power Supply

POWER SELECTION

1. 7.4V/2500mAh Lithium Rechargeable battery

2. 110 - 220V AC/DC adaptor 10VDC, 1000mA

Instructions for using the battery:

1. Fully charged the battery during its first time use

Use the specified charger/ power adaptor and plug it to a source

ranging 100-240VAC, 50/60hz. The battery is being charged when the

display is showing " CHArGE" " -------" and " Pbtxx"

2. When the low battery symbol is on, it means the power of scale is low

and needs to change the battery or to recharge using the specified

adaptor.

9 |

ANYLOAD NPS Series Pallet Jack Scale Operator's Guide (V1906) – T15E v2 series indicator