Anywire ASLINK BL296SB-04FS-4A-20 Ürün Kılavuzu - Sayfa 12
Dokunmatik terminaller Anywire ASLINK BL296SB-04FS-4A-20 için çevrimiçi göz atın veya pdf Ürün Kılavuzu indirin. Anywire ASLINK BL296SB-04FS-4A-20 15 sayfaları.
[Configuration and Electrical Characteristics of the Input and Output Circuits]
4-wire (isolated) NPN input
BL296SB-04F-4A-20
BL296XB-04F-4A-20 (Input)
<Circuit conditions>
Rated input voltage:
Max. switching current:
ON current:
OFF current:
ON voltage:
OFF voltage:
Allowable current at 24V:
4-wire (isolated) NPN output
BL296PB-04F-4A-20
BL296XB-04F-4A-20 (Output)
<Circuit conditions>
Withstand voltage:
30V DC
Max. ON current:
100mA
24V DC
3.5mA
2.2mA or more
1mA or less
16V or more (24V-IN)
8V or less (24V-IN)
1A max. (24V-0V)
(per terminal)
CAUTION
To connect loads (e.g. I/O ports) that
are controlled with a power supply
other than the one used for the
AnyWireASLINK system, always use a
4-wire (isolated) terminal.
Otherwise, malfunction may be caused.
[E.g.]
Use the device by connecting the 0V
lines together.
24V (Green)
DP (Red)
DN (Black)
0V (White)
CAUTION
To connect loads (e.g. I/O ports) that
are controlled with a power supply
other than the one used for the
AnyWireASLINK system, always use a
4-wire (isolated) terminal.
Otherwise, malfunction may be caused.
[E.g.]
Use the device by connecting the 0V
lines together.
-BL296*B04F*4A20 12/15-
24V (Green)
DP (Red)
DN (Black)
0V (White)
24V (Green)
DP (Red)
DN (Black)
0V (White)
4-wire (isolated) ASLINK terminal
(Power supply of the AnyWire system)
24V (Green)
DP (Red)
DN (Black)
0V (White)
4-wire (isolated) ASLINK terminal
(Power supply of the AnyWire system)
24V (1)
6.8k
IN (4)
Switch, sensor, etc.
(2-wire type)
0V (3)
24V (1)
24V
6.8k
IN (4)
OUT
0V
(3)
0V
Load driven by
an external power supply
To connect
24V (1)
inductive load, use
a surge killer.
If output is turned
ON with the OUT
and 24V terminals
short-circuited,
OUT (4)
the output device
will be damaged.
24V (1)
24V
IN
OUT (4)
0V
Load driven by
an external power supply