Acer X1373WH Series Hızlı Başlangıç Kılavuzu - Sayfa 2

Projektör Acer X1373WH Series için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Acer X1373WH Series 17 sayfaları.

Sayfayı Yazdır

Acer X1373WH Series Hızlı Başlangıç Kılavuzu

English

Quick Start

INSTALLATION

1. Power cord

2. VGA cable

3. VGA to component video/HDTV

adapter

4. Composite video cable

5. Audio cable

6. S-Video cable

7. RS232 cable

8. USB cable

9. 3 RCA component cable

10. HDMI (MHL) cable

Note: Connector interface is subject to model's specifications

INTERFACE CONNECTOR

Connecting to a Computer

1. Ensure the projector and your

computer are turned off.

2. Connect one end of the VGA cable to

the "VGA IN" connector on the

projector; connect the other end to

the VGA connector on the computer

and tighten the screws.

3. Connect one end of the power cord

into the AC power socket on the

projector; connect the other end to an

electrical outlet.

Powering On the Projector

1. Turn on the projector first and then

the computer.

2. Adjust the position, focus and zoom.

3. Run your presentation.

Powering Off the Projector

1. Press the power button twice.

2. Do not remove AC power cord from

outlet until the projector fans shut

down.

3. Do not turn off and unplug the

projector for at least one minute after

turning it on.

Bahasa Indonesia

Start Cepat

INSTALASI

1. Kabel daya

2. Kabel VGA

3. VGA ke video komponen/adaptor

HDTV

4. Kabel video gabungan

5. Kabel audio

6. Kabel S-Video

7. Kabel RS232

8. Kabel USB

9. 3 Kabel komponen RCA

10. Kabel HDMI (MHL)

Catatan: Antarmuka penghubung untuk spesifikasi model

PENGHUBUNG ANTARMUKA

Menghubungkan ke Komputer

1. Pastikan proyektor dan komputer

Anda mati.

2. Hubungkan salah satu ujung kabel

VGA ke penghubung "VGA IN"

pada proyektor; hubungkan ujung

kabel yang lain ke penghubung

VGA pada komputer dan

kencangkan sekrup.

3. Hubungkan salah satu ujung kabel

daya ke dalam soket daya AC pada

proyektor; hubungkan ujung kabel

yang lain ke outlet elektrik.

Pemberian Daya pada Proyektor

1. Hidupkan proyektor dahulu,

kemudian komputer.

2. Sesuaikan posisi, fokus dan zum.

3. Jalankan presentasi Anda.

Memutus Daya pada Proyektor

1. Tekan tombol daya (power) dua

kali.

2. Jangan pindahkan kabel daya AC

dari stop kontak hingga kipas

proyektor mati.

3. Jangan matikan dan lepas kabel

proyektor minimal selama satu

menit setelah dihidupkan.