AudioStak ProSwitch PRSW-MONO-PCB Kılavuz ve Kurulum Kılavuzu - Sayfa 13
Kontrol Ünitesi AudioStak ProSwitch PRSW-MONO-PCB için çevrimiçi göz atın veya pdf Kılavuz ve Kurulum Kılavuzu indirin. AudioStak ProSwitch PRSW-MONO-PCB 20 sayfaları.
Sayfayı Yazdır
one head unit and one pair of speakers can be selected at a time. When a head unit is selected, it is connected
to the Signal Bus for the Head Unit Group. When a speaker pair is selected, it is connected to Signal Bus for the
Speaker Pair Group. Finally, the Signal Bus connection between these two Groups connects the selected head
unit to the chosen pair of speakers.
Figure 11 shows a sample system for eight head units and eight speaker pairs. Power, COMM and button wiring
are not shown for simplicity. Head Units are set as Component Group #1, and Speakers are set as Speaker
Group #1. Note that Speaker Groups and Component Groups are handled separately by ProSwitch systems,
Head Unit Group
Head Unit 1
Head Unit 3
SIGNAL BUS
Head Unit 5
Head Unit 7
SIGNAL BUS
Figure 11: Eight Head Units and Eight Speaker Pairs
Overview – Signal Bus
C B M
GROUP
BOARD
Head Unit 2
Head Unit 4
C B M
GROUP
BOARD
Head Unit 6
Head Unit 8
SIGNAL BUS
Speaker Group
Speaker Pair 1
Speaker Pair 3
Speaker Pair 5
Speaker Pair 7
C B M
GROUP
BOARD
Speaker Pair 2
Speaker Pair 4
SIGNAL BUS
C B M
GROUP
BOARD
Speaker Pair 6
Speaker Pair 8
SIGNAL BUS