Abus Vitess Rim Servis Kılavuzu - Sayfa 17

Kilitler Abus Vitess Rim için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Abus Vitess Rim 20 sayfaları.

Abus Vitess Rim Servis Kılavuzu

REFILL OF HOUSINGS

Insert the top pins
1st and 3rd chamber: hardened steel;
2nd and 4th chamber: anti-pick mushroom pins
5th and 6th chamber: stainless steel "centering" pins
1st
2nd
Top-Pin: Hardened
Mushroom: Brass
Step 1
Insert the springs, introduce the
s-shaped lever from below into the slot
of the charging thorn and push the
springs with the lever into the thorn
Step 4
Insert the lever from above into the slot
and push the pins completely into the
housing
3rd
4th
Top-Pin: Hardened
Mushroom: Brass
Step 2
Insert the charging thorn into the
housing and remove the lever
Step 5
Turn the charging device with the lever
about 45° and remove the lever
Push the plastic plug or follower into
the housing until the thorn has been
pushed through completely
5th
6th
Top-Pin: Nickel Silver
Top-Pin: Nickel Silver
Step 3
Turn the thorn until the springs drop
audibly into the cylinder housing
Step 6
Make sure the plug goes into the
housing with about an angle of 15°.
Housing pins should not be «snap» into
the groove of plug
17