Apogee Black Brant VC Manuel

Oyuncak Apogee Black Brant VC için çevrimiçi göz atın veya pdf Manuel indirin. Apogee Black Brant VC 16 sayfaları.

Sayfayı Yazdır

Skill Level 4

Moderately Challenging

Included in the Black Brant series of sounding rockets orig-

inally developed by the Canadian Government in combination

with Bristol Aerospace, the Black Brant VC is a 4-fin variant

of the fifth rocket in the series which first flew April 4th, 1970.

More than 100 flights of the single-stage VC have been com-

pleted since then, and modified versions have flown as upper

stages on a number of other Black Brant rockets. All together,

more than a thousand Black Brant rockets have been flown

with a success rate of over 98%. The combination of longevi-

ty, flexibility, and reliability have made the Black Brant family of

rockets some of the most popular sounding rockets in history.

As iconic as the Black Brant VC is however, it is also a

nearly ideal target for the entry-level scale modeler. As a solid

propellant, aerodynamically stabilized, sounding rocket, there

is no need for large nose weights or clear plastic ("cheater")

fins to make a model stable. Moreover, the surface details are

all fairly simple (in fact, many Black Brant flights used exclu-

sively internal antennas). Taken together, it is a perfect model

for those with an interest in scale modeling, but only minimal

experience.

This kit has been designed to allow for the creation of a

reasonably detailed sport-scale model straight out of the pack-

age. Nevertheless, the kit is an excellent canvas for additional

details, should the builder desire to add them. With balsa

wood fins and cardstock details, the rocket is built entirely of

materials that any rocket builder will have experience with and

the assembly techniques – while requiring care and patience

– are techniques that are used in lower skill level models. The

Black Brant VC is a perfect start to any exploration of scale

modeling. And with its reasonably small scale of 1:15 (or,

more precisely, 1:14.66), it flies exceptionally well on a wide

variety of readily available 18mm motors, so it is an economi-

cal rocket as well.

Kit #05061

Skill Level 4

Black Brant

Black Brant VC Parts List

Item # Item Name

10068 AT-18/2.75"

10091 AT-24/3.75"

10110 AT-29/13"

10254 AT-29/3.75"

13008 AC-29

13029 CR-13/18

13031 CR-18/24

13035 CR-24/29

13051 1/8" Launch Lug 1"

15726 Black Brant VC Jig and Detail Parts Cardstock

15727 Black Brant VC 3/32"x3" Balsa Fin Sheet

19114 PNC-29A

24043 Regular "D" Crimped Engine Hook

29124 12" Parachute Packs for Kits

29519 100# Kevlar* x 6 feet

31258 Black Brant VC Instruction Sheet A

31259 Black Brant VC Instruction Sheet B

31260 Black Brant VC Instruction Sheet C

31261 Black Brant VC Instruction Sheet D

39055 Black Brant VC Face Card

41111 Black Brant VC Waterslide Decals Sheet

Needed Tools and Materials

Pencil

Ruler

Hobby Knife with Sharp Blades

Scissors

Thin CyA Adhesive

Medium CyA Adhesive

Wood Glue

Aluminum Angle Extrusion

Masking Tape or Cellophane Tape

Wood Filler or Modeling Filler

Sandpaper - 180 or 220 grit, 320 or 400 grit

Sanding Block (e.g. Sanding Tee - Item # 02100)

Pin or Needle

Optional Tools / Finishing Supplies

Paper Towels

Painter's Tape or Masking Tape

Sandpaper: 400 grit

Paint Supplies: Spray Paint, Brushes, etc.

Bowl of Water with a little Dishwashing Soap

Tweezers

Cotton Swabs

Sweing Needle or Short Section of Fine Music Wire

Manufactured in the USA by:

Apogee Components Inc.

Colorado Springs, Colorado, USA

www.ApogeeRockets.com

Made In USA

Qty

Page 1