Addvent AVAC9000W Kurulum Talimatları ve Kullanım Kılavuzu - Sayfa 7
Klima Addvent AVAC9000W için çevrimiçi göz atın veya pdf Kurulum Talimatları ve Kullanım Kılavuzu indirin. Addvent AVAC9000W 9 sayfaları.
Sayfayı YazdırAVAC9000W[15]instructions
Installation
For continuous/fixed drainage (dehumidify mode)
If you wish to have the unit continuously drain, please
follow the following instructions:
• You will need a 25mm (1 inch) PVC hose
• Remove the cover from the drainage outlet
9 in top figure.
• Remove the soft rubber stopper inside the cover.
• Insert the drain pipe through the ring of the stopper.
• Re-fit into to the drainage outlet.
Troubleshooting
The following cases may not always be a malfunction, please check it before
asking for service.
Problem
The unit does not
function
The unit functions for only
brief periods in cooling mode setting
Warning light indicator
illuminated
Unit functions but
does not cool
9/4/15
09:43
Page 7
Cause
Power Failure
Improper thermostat
Internal condensate
tank full
Windows open
Another source of heat
in room or too many
people in room
Thermostat temperature
setting too high
Air filter blocked
Air conditioner capacity
is unsuitable for the size
of room or conditions
Loss of refrigerant
Exhaust hose blocked
7
Solution
Check Fuse
Decrease thermostat setting by
adjusting temperature setting
Drain unit via drain
plug at rear of unit
Close windows
Remove source of heat
Decrease thermostat setting by
adjusting temperature setting
Clean filter
Consult supplier
Call Addvent
Remove obstruction