AC MGA0800/A1 Kullanıcı Kılavuzu - Sayfa 11

Klima AC MGA0800/A1 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AC MGA0800/A1 16 sayfaları.

Sayfayı Yazdır

1. Cooling

5.2 Menu structures

▲

Pressing

pressing

SET

again ; Be back to the main interface if pressing

: parameter setting. In the interface, press

after that the password is entered correctly, it will display the parameter code, the default is P01. Press

▲

and

▼

to adjust the addition and subtraction of the parameter code. After the selection of the

parameters of the code, press

▼

and

to adjust the addition and subtraction of the parameters value. And then press

confirm the parameter values changes, if don't need to save adjusted parameters, please press

：Check the parameters. Pressing

the parameters can be shown several seconds later.

：Show the alarms. Fault alarm code will be shown in the display screen. They will be shown

successively, if there are several alarms one time.

Set key

SET

Up key

▲

Down key

▼

, it will show

SET

to confirm, and then enter the parameters interface, and Press

Select function and enter parameter set

Increase value, page up

Decrease value, page down

and

SET

to enter the password input interface, and

▲

▼

, it will show T01、T02、T03、T04 in turn , and

in turn, Enter to the main interface if

ESC

again.

▲

SET

, to

ESC