Datamax MP-Nova4 TT Ağ Kılavuzu - Sayfa 16

Yazıcı Datamax MP-Nova4 TT için çevrimiçi göz atın veya pdf Ağ Kılavuzu indirin. Datamax MP-Nova4 TT 19 sayfaları. Network & communication guide

Network & Communication

Terminal Server Mode (NetBox)

The printer has a built-in terminal server function. This means that

the serial ports can be used as terminal server ports.

When a serial port is set up for terminal server mode, a TCP port

is connected to it. All data received on that TCP port is sent to the

serial port and vice versa. The serial port can be set up as either

server (passive) or client (active).

If the serial port is set up as a server, the printer will listen to the

specified TCP port (default for COM1 is 2001 and for COM2

2002).

If the serial port is set up as a client, the terminal connected to the

serial port will get a prompt asking for the remote host. The host

can be either an IP address or a host name. When the user has

entered the host data, the printer will try to connect to the Telnet

port (TCP port 23) on the host.

Example

COM1 is set up in terminal server mode. It uses the TCP port

2001 in order to communicate with the host. The data received on

port 2001 is sent to COM1 and vice versa.

Stacked Printers Mode

One host may be connected to several printers through one port.

Data received on COM1 on the first printer can be re-directed to

COM2, which is connected to COM1 on the next printer etc. Both

COM1 and COM2 must be set up in print mode. The command

"!Y92 <n>" is used to re-direct data.

!Y92 1 connects to the first printer,

!Y92 2 to the second printer,

!Y92 3 to the third printer etc.

Example

One host is connected to three printers through COM1 on one of

the printers. Three layouts are sent, one to each printer and all

printers are checked for paper. In addition there will be a status

request.