ADE M301020 Series Kullanım Kılavuzu - Sayfa 9

Terazi ADE M301020 Series için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. ADE M301020 Series 16 sayfaları. Electronic platform and handrail scales

Sayfayı Yazdır

Restore the preset PRESET TARA value:

Press the PRESET TARE key (10). "Pt x" appears on the display. Enter a number from 0-9 (memory location

for the tare value). If no number is entered within five seconds, the unit will turn back to weighing mode.

After entering the number, the ADE-MAK accesses the preset tare value, shows it for five seconds on the dis-

play and then changes to net mode. The accessed tare value is accepted at the same time. Enter the tare

button again to leave this mode.

Displaying the gross weight, net weight and tare value:

Press the "0" key to change between displays for tare, gross weight (NET status indicator (5) off) and net

weight (NET status indicator (5) on). If a tare value is saved, the net weight shown corresponds to the gross

weight minus the tare value. If there is no tare value saved, the display remains in gross mode.

The tare value flashes briefly, then after a second the display changes to gross mode.

Hold function

Use the HOLD key to hold the display if there are weight fluctuations which e.g. are caused by patient move-

ments on the scales. You could also use this function if you like to hold the results at the display after the

weight/load has been removed from the scale.

To do this, the scales must be at standstill, e.g. the standstill status indicator

setting it is not always necessary for the scales to be at standstill). The Hold status indicator (15) is on.

Deactivate the HOLD function by pressing the key again.

Determining the Body Mass Index (BMI)

The BMI figure is a index which displays the ratio between height and weight.

To determine this value you need the height of the person. Best way to get the height is of course to use an

ADE height measuring rod; model MZ10023.

Start the scale and weigh the person. Then press the BMI key (11) to start BMI mode. The last value entered

appears on the display. Use the numerical key pad to enter a new value for the height (in cm) or retain the

value which is already displayed.

Confirm the value entered with the ENTER key or delete same by using the CLEAR key. After the entry has

been confirmed by the ENTER key, the BMI value will be calculated using the weight on the scales. The dis-

play changes between weight value and BMI value "b xx.x" (every two seconds) for a period of 3 minutes.

Press the BMI key (11) to cancel befoe this time has expired.

Evaluating Body Mass Index

BMI evaluation according to WHO

BMI

18.5

BMI

18.5

BMI

M301020-01-210322-Rev005-UM-e

BMI=

Severely underweight

Moderately underweight

Slightly underweight

Normal weight

Overweight

Obese Class I

Obese Class II

Obese Class III

body weight

(height)²

(14) is on (depending on the