ADE M500020-B Kullanım Kılavuzu - Sayfa 7

Terazi ADE M500020-B için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. ADE M500020-B 16 sayfaları. Electronic wheelchair and multipurpose scales

Sayfayı Yazdır
ADE M500020-B Kullanım Kılavuzu

Description

2
3
4
5
6
7
8
9
10
No. Name
1

Display

2
Battery charge level
3
Switching points 1 & 2
BMI status indicator
4
(HI, OK, LO)
5
Net status indicator
6
Status indicator
7
Hold – button
8
On/off, zero – button
9
Tare- button
10
Preset tare – button
11
BMI – Button
12
Units – Button
13
Number pad
Special function:
"0" key
"Enter" key
Standstill status indica-
14
tor (14)
:
15
"Hold"
17
"kg"
"g"

Connecting additional devices

Printer, PC or remote-display could be connected by the RS-232 interface. For connection of additional devic-
es kindly ask your local representative or authorized ADE dealer for further instructions.

Housing and connections

The connections to mains adapter, serial port and to the load cells are located at the back of the ADE display.
The set-up switch to start the configuration mode is underneath the housing. It is protected by a cover plate
and secured by a screw (not shown in Fig. 2-1).
M500020-210322-Rev009-UM-e
Display
1
Fig. 1-1 Indicator and operating controls
Description
LCD display for weight, mode, settings and configuration information.
Status indicator for the current battery charge level.
In program mode: Status indicator for switching points 1 & 2.
Status indicator of the automatic BMI (Body Mass Index) evaluation.
LCD on - net weight is being displayed.
LCD off – gross weight is being displayed.
The scale is at zero level.
Activates the hold function.
On and off switch and re-set of the display.
Activate/ deactivate the tare function.
Press briefly to access the tare function.
Press for a long period to enter and save the tare value.
Enter to proceed with BMI mode.
Switch button between primary and secondary units. Not available for CE
approved class III scales
Figures 0-9, Clear, Enter and Navigation functions: Key 6 menu direction
to the right; Key 4 menu direction to the left; Key 8 menu direction down;
Key 2 menu direction up. For better understanding see Pic. 1.1 the blue
arrows. Used to navigate through menus, to select numerical values and
to increase or lower the value.
In weight mode, you can change between gross and net weight using
figure "0" (if any weight have been tared off).
Function in weight mode: "Print" if printer has been connected.
The scale is at a standstill. The weight is stable with no movement. This
is mandatory for functions like reset, print and tare.
If displayed is the hold function is activated
If displayed is the weight is displayed in kilograms
If displayed is the weight is displayed in grams
17
16
15
14
11
12
13
7