AUSTRALIAN MADE SILVER LYNX Montaj Talimatları - Sayfa 2
İç Mekan Mobilyaları AUSTRALIAN MADE SILVER LYNX için çevrimiçi göz atın veya pdf Montaj Talimatları indirin. AUSTRALIAN MADE SILVER LYNX 3 sayfaları. Underbed drawer to suit bed base
Sayfayı Yazdır
STEP 1 –
Depending on the range,
your underbed drawer may be suitable
for use at either the foot end, or the
side of your bed. Determine the
position you would like to install your
Underbed Drawer Unit (where
suitable). Place your Underbed Drawer
Unit in front of your assembled Bed in
your chosen position (shown below).
STEP 2 –
Carefully slide the
Underbed Drawer Unit into its final
position under the bed, checking that
spacing is even (if installing at the foot)
and that drawers are able to open and
close smoothly. If using as side
storage, we recommend you position
your drawer near the foot end to ensure
drawers are clear of your bedside table.
STEP 3 –
Complete the above
process on the other Side Rail, then
repeat with the Foot Panel.
Having trouble? See *Helpful Tips* at
the end of this document.
Bomi Furniture P/L trading as SilverLynx ABN 99 006 489 541 11-17 Sages Road Glenroy Victoria 3046 Australia
T:+61 3 9359 4000 F:+61 3 9359 4322 E:[email protected] W:www.silverlynx.com.au
STEP 1 [FOOT POSITION]
STEP 1 [SIDE POSITION
]
STEP 2 [FOOT POSITION]
STEP 2 [SIDE POSITION
]