Australian massage group AMG-3800 Çalıştırma Talimatları Kılavuzu - Sayfa 8

Masaj Australian massage group AMG-3800 için çevrimiçi göz atın veya pdf Çalıştırma Talimatları Kılavuzu indirin. Australian massage group AMG-3800 10 sayfaları. Four-wheel driven, muted, intelligent massage hands

Sayfayı Yazdır

Method of Usage

•

Remove the screw on the front-end of the armrest (Note: The screw is in the side of steel

frame). (Figure 7)

Remove the screw on the front-end of the armrest (Note: Be careful not to miss the fixed

•

plastic block). (Figure 8)

•

Remove the screw on the back-end of the armrest (Note: Zip the backrest kneading cloth

open completely to find it). (Figure 9)

•

Gently lift up the front-end of the armrest and pull out the buckle. (Figure 10)

•

Gently pull forward the back-end of the armrest to pull out the decoration cover, then lift up

the back-end of the armrest to pull out the buckle. (Figure 11)

•

Unplug the joint of the upper armrest air pipe to remove the armrest completely. (Figure 12)

Method of Usage

5. Armrest installation method

•

Connect the air pipe on the back-end of the armrest to the upper arm. (Figure 1)

Put the air pipe and power cord into the steel frame (Note: Avoid getting the air pipe stuck).

•

(Figure 2)

•

Hook the back-end of the armrest on the steel frame (Note: There are two; place it on the

upper one). (Figure 3)

•

Insert the back-end of the armrest into the decoration cover of the upper arm. (Figure 4)

•

Hook the front-end of the armrest on the steel frame and lock the buckle. (Figure 5)

•

Gently push the armrest down, and double check that the hook is well locked. (Figure 6)

•

Put the plastic block between the armrest and the calf rest pothook, then tighten the up and

down screws. (Figure 7)

•

Tighten the screws on the back-end of the armrest. (Figure 8)