BENDIX DV-2 Hizmet Verileri

Kontrol Ünitesi BENDIX DV-2 için çevrimiçi göz atın veya pdf Hizmet Verileri indirin. BENDIX DV-2 4 sayfaları. Automatic reservoir drain valve

Sayfayı Yazdır

Bendix

DV-2

Automatic Reservoir Drain Valve

™

Standard Bendix

Body

Sealing

Ring

Valve

Guide

Electrical Lead

Wire

Figure 1 – Bendix

DV-2

DESCRIPTION

The Bendix

DV‑2

automatic reservoir drain valve ejects

™

moisture and contaminants from the reservoir in which it

is connected. It operates automatically and requires no

manual assistance or control lines from other sources.

The automatic reservoir drain valve has a die cast

aluminum body and cover, and is normally mounted either

in the bottom of the reservoir – using the top port of the

drain valve, or in the end of an end drain reservoir – using

the side port of the valve.

DV-2

™

Drain Valve

Adapter

Wire Stem

DV-2 Drain Valve with Heater and Thermostat

Drain Valves

™

DV-2 Drain Valve

with Heater

Top Reservoir

Port

Exhaust Port

The DV‑2 drain valve is also available with a heater and

thermostat cast into the cover for vehicles operated in

subfreezing temperatures. The heated DV‑2 valve is

supplied in either a 12 or 24 volt model and in a bottom

or end drain configuration. A 1/4" male pipe adapter is

supplied with all DV‑2 drain valves, end drain and bottom

drain, both standard and heated. This adapter should be

installed directly into the reservoir. Early versions included

a filter screen in the adapter. The filter should be discarded.

Later versions may have a standard pipe nipple instead

of the adapter.

Side

Reservoir

Port

Inlet &

Exhaust

Valve

Heater Element

Cover

Thermostat

Housing