5BARz MD015A-800 Kullanıcı Kılavuzu - Sayfa 3

Genişletici 5BARz MD015A-800 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. 5BARz MD015A-800 7 sayfaları.

Step 1
Place the 5BARz Road Warrior in the area where you want more BARz -- usually
the closer to a window the better the performance.
Step 2 Insert the cable attached to the phone cradle into the port labeled "VDC"
located on the back of the 5BARz. Place the phone cradle as far apart from the 5BARz as
the cable will stretch for optimal performance.
Step 3
Pry open the easel-like stand on the back of the cradle to hold the phone
cradle in an upright position. Place your turned-on phone in the cradle and adjust the side
clasps to fit snuggly by depressing the clasp release on the side of the cradle and adjusting
the clasps in and out as needed. (There is no need for the cigarette lighter adapter for indoor
use.)
Step 4 Insert the cord from the wall mount power supply line into the power port
on the back of the 5BARz. Next, plug the power supply into the wall socket (use an
extension cord for longer distances). Once the unit is plugged in you will see the blue LED
lights in about 10 seconds.
Observe the bars on your phone after you plug in the 5BARz. W
in the holder, you should see an increase in bars in approximately 10 seconds. Now you have
more BARz for better reception and are ready to use your phone and Bluetooth
or speakerphone.
Important Notes
Note: The phone holder must be placed at least 20 cm (or approximately 8-inches) away from all
persons during normal operation to comply with the FCC's radiofrequency radiation exposure
requirement.
Note: For optimal performance place 5BARz in the location with the best serving signal as
indicated on your phone. (See
Note: Unplug the power supply when not using the 5BARz
Note: The cell phone can be removed from the phone cradle when using the 5BARz
®
a Bluetooth
device paired to the cell phone while it is resting in the phone cradle is
recommended for best results.

Operation Tips

The 5BARz Road Warrior is compatible with every carrier in the US and Canada except
"iDEN" phones used by Nextel, Southern LINC, MiKE (Canada); 3G TMobile's 3G services
(TMobile's voice service is compatible) and WiMax.
www.cellynx.com/support
 
ith the phone resting
for more details)
®
device, headset
TM
. However,