Great Lakes Case & Cabinet GL840EZ-3042 Kurulum Talimatları Kılavuzu - Sayfa 4

Muhafaza Great Lakes Case & Cabinet GL840EZ-3042 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Great Lakes Case & Cabinet GL840EZ-3042 16 sayfaları. Ez seismic enclosure

Sayfayı Yazdır

loading equipment

WARNING: Only install equipment after the EZ Enclosure has been

properly secured. Do not move the EZ Enclosure assembly while

loaded.

Rated or maximum load capacity for the EZ Enclosure is 1000 lbs.

(3000 lb. non-seismic weight capacity). Enclosure must be secured to

floor using the included AK101 Seismic Anchor Bolts.

To maintain a uniform distribution of the mechanical load in the EZ

Enclosure, load the heaviest equipment first, at the bottom of the

EZ Enclosure and load the lighter units at the top.

oPeRaTinG dooR handLe

The door swing handles have been installed at the manufacturer.

No additional assembly is required. The EZ doors have a three point

latching system. To operate the swing handle, lift up at the bottom of

the handle then swing the handle to the right to open. The handle must

be kept in this position to close the door. Return the handle to the initial

position and use the key provided to lock the handle.

Important note: Doors are reversible, but require

an additional hinge kit. Please contact your

distributor/Great Lakes representative for the

EZ Hinge Kit.