8devices Korlan USB2CAN Kullanıcı Kılavuzu - Sayfa 3
Kayıt Ekipmanları 8devices Korlan USB2CAN için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. 8devices Korlan USB2CAN 15 sayfaları. High quality isolated usb to can interface
Ayrıca 8devices Korlan USB2CAN için: Kullanıcı Kılavuzu (17 sayfalar)
Sayfayı Yazdır
1. Introduction
Korlan USB2CAN provides a convenient computer (USB) to CAN 2.0 network interface.
You can send and receive CAN messages. Write your program for communicating with industrial, medical,
and automotive devices equipped with CAN interface. Korlan USB2CAN comes in two different versions:
DB9 or OBD2. The Korlan CANBUS USB adapter connects a CAN bus to the USB port of any device
running the Linux or Windows operating system, which also supplies the power to the adapter (no power
supply is required). In the downloads section, you can find all the related drivers, software applications, and
programming examples for Windows 10/11 and Linux operating systems.
1.1 Usage warning
Use your device with caution and a complete understanding of the risks. This warning informs you that the
operation of this device may be dangerous. Your actions can influence the behavior of a CAN-based
distributed embedded system, and depending on the application, the consequences of your improper
actions could cause serious operation malfunction, loss of information, damage to equipment, and physical
injury to yourself or others.
1.2 Technical specification
CONNECTORS
Computer
CAN
CAN
Specification
Bit rates
Controller
Transceiver
Galvanic isolation
Termination
MEASURES
Size
Weight
ENVIRONMENT
Operating temperature
Relative humidity
Usage
OTHER
Available drivers
3rd party ptotocol support
KORLAN USB2CAN
USER GUIDE
USB 2.0 Full speed, Type A connector
D-SUB, 9 pins. CAN-CIA standard interface pin assignment or OBD2, 16 pins. Standard interface pin
assignment.
ISO 11898-2 High-speed CAN
2.0A (standard format) and 2.0B (extended format)
50, 50, 100, 125, 250, 500, 800, 1000 Kbit/s or user definable
ARM 32bit Cortex-M0 (STM32F072)
TI ISO1050
Up to 2.5kV, separate for each CAN channel
None
110 x 36.7 x 16.2 mm (L x W x H), no cable
DB9 version: 100g with cable, OBD2 version: 140g with cable
From -35ºC to +55ºC
15-90%, not condensing
Indoor only
Windows 2000, Windows XP, Windows Vista, Windows 7, Windows 10, Linux
Driver for VSCP protocol
3