DBI SALA Flexiguard 8530566 Kullanım Kılavuzu - Sayfa 13
Güvenlik Ekipmanları DBI SALA Flexiguard 8530566 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. DBI SALA Flexiguard 8530566 18 sayfaları. Adjustable jib boom fall arrest system
Sayfayı Yazdır5.0
INSPECTION
5.1
INSPECTION FREQUENCY: The Flexiguard System must be inspected at the intervals de ned in Section 1. Inspection
procedures are described in the "Inspection and Maintenance Log" (Table 2). Inspect all other components of the Fall
Protection System per the frequencies and procedures de ned in the manufacturer's instructions.
i-Safe™ RFID:
Some Flexiguard Systems are equipped with an i-Safe Radio Frequency Identifi cation (RFID) Tag. The RFID Tag can
be used in conjunction with the i-Safe Handheld Reading Device to simplify inspection and inventory control and provide records for you
fall protection equipment. If you are a fi rst-time i-Safe user, contact Capital Safety or visit www.capitalsafety.com.
5.2
DEFECTS: If inspection reveals an unsafe or defective condition, remove the System from service immediately and
contact Capital Safety regarding replacement or repair. Do not attempt to repair the System.
IMPORTANT:
Only Capital Safety or parties authorized in writing by Capital Safety may make repairs to this equipment.
5.3
PRODUCT LIFE: The functional life of the System is determined by work conditions and maintenance. As long as the
product passes inspection criteria, it may remain in service.
6.0
MAINTENANCE, SERVICING, STORAGE
6.1
CLEANING: Periodically clean the System's metal components with a soft brush, warm water, and a mild soap solution.
Ensure parts are thoroughly rinsed with clean water.
IMPORTANT:
Although highly resistant to chemicals and environmental conditions, avoid contaminating the Flexiguard System with
acids, bitumen, cement, paint, cleaning fl uids, etc. If the equipment contacts acids or other caustic chemicals, remove from service and
wash with water and a mild soap solution. Inspect per Table 2 before returning to service.
6.2
SERVICE: Only Capital Safety or parties authorized in writing by Capital Safety may make repairs to this equipment. If
the Flexiguard System has been subject to fall force or inspection reveals an unsafe or defective conditions, remove the
system from service and contact Capital Safety regarding replacement or repair.
6.3
STORAGE AND TRANSPORT: When not in use, store and transport the System and associated fall protection equipment
in a cool, dry, clean environment out of direct sunlight. Avoid areas where chemical vapors may exist. Thoroughly inspect
components after extended storage.
DISTRIBUTED BY CAI SAFETY SYSTEMS | Phone: (888) 246 6999 | Web: caisafety.com | Email: [email protected]
13