DBI SALA Flexiguard 8530579 Kullanıcı Talimat Kılavuzu - Sayfa 7

Endüstriyel Ekipmanlar DBI SALA Flexiguard 8530579 için çevrimiçi göz atın veya pdf Kullanıcı Talimat Kılavuzu indirin. DBI SALA Flexiguard 8530579 16 sayfaları. Safrig fall arrest system

Sayfayı Yazdır

WARNING:

This product is part of a Personal Fall Arrest and Work Positioning system. The user must follow the manufacturer's instructions

for each component of the system. These instructions must be provided to the user of this equipment. The user must read and understand

these instructions before using this equipment. Manufacturer's instructions must be followed for proper use and maintenance of this equipment.

Alterations or misuse of this product or failure to follow instructions may result in serious injury or death.

IMPORTANT:

If you have questions on the use, care, or suitability of this equipment for your application, contact Capital Safety. For general

questions, refer to national Standards including the ANSI Z359 (.0, .1, .2, .3, and .4) family of standards on fall protection, ANSI A10.32, and

applicable local, state, and federal (OSHA) requirements governing occupational safety for more information about fall protection systems.

IMPORTANT:

Prior to installation and use of this equipment, record the product identification information from the ID label in the

Inspection and Maintenance Log (Table 2) at the back of this manual.

PRODUCT DesCRIPTION:

Figure 1 illustrates the Flexiguard

Arrest System that rotates 360° on a Concrete-filled Counterweight Base (models 8530595 and 8530606) or Steel Outrigger

Base (models 8530579 and 8530607). The bases are configured to allow transport of the system with a Crane, Hoist, or Forklift

with a Sling Strap. A leveling Jack Kit for the concrete base is available. The SafRig Fall Arrest System includes an integrated

rescue capability.

Figure 2 illustrates components of the SafRig Fall Arrest System. See Table 1 for Component Specifications. The Boom (E)

extends from the Vertical Mast (D). A Self-Retracting Lifeline is be connected to the Boom for fall protection. The Vertical Mast

can be rotated 360° with the Rotation Handle (G) and locked at 11° increments or allowed to rotate through a range defined by

stop pins (see Figure 8). SafRig Fall Arrest System bases have Lifting Channels (H) for transport with a forklift, pallet jack, crane,

etc. The Concrete-filled Counterweight Base also includes Lifting Eyes (I) for use with a forklift or crane. A Slope Indicator (I) on

Concrete-filled Counterweight Bases can be used to determine if the system is level. Optional Leveling Jacks can be installed on

Concrete-filled Counterweight Bases.

Component Specifications:

Figure 2

Reference

Component

Hitch Ball Post

Concrete Filled Counterweight

Base

Steel Outrigger Base

Vertical Mast

Boom

Fall Arrest Connection Point

Rotation Handle

Lifting Channels

Lifting Eyes, Concrete Filled

Base

Slope Indicator, Concrete

Filled Base

i-Safe™ RFID Tag

Models 8530595 and 8530579 include SRL, Tagline and Caribiner, not shown.

System Specifications:

Capacity:

1 Person with a combined weight (including clothing, tools, etc.) of no more than 310 lbs (141 kg) or 420 lbs

(191 kg) with a 900 lb (408 kg) MAAF device.

Anchorage:

Structure supporting the Fall Arrest System must withstand a 7,350 lb (33 kN) vertical load.

SafRig Fall Arrest System. The SafRig Fall Arrest System is a fixed height boom mounted Fall

Table 1 – Specifications

Materials

Tube - Steel

Hitch Ball Pivot - Steel

Steel Shell, Concrete with Steel Rebar

Steel

Tube - Steel

Steel

Tube - Steel

Hand Grip - Rubber

Steel

Plastic Gauge on Aluminum C-Channel

Nylon, Glass

Filled with 4,000 psi Concrete

1,800 lb (8 kN) Vertical (â) Load

5,000 lb (2,268 kg) Vertical (â) Load

(1,250 lbs per eye)

Radio Frequency - 13.56 MHz

Rating