8STREME Black Pearl Manuel - Sayfa 5
Yüzme Havuzu Vakumu 8STREME Black Pearl için çevrimiçi göz atın veya pdf Manuel indirin. 8STREME Black Pearl 9 sayfaları. Autonomous swimming pool cleaner
Sayfayı Yazdır
05 Start-up
5.7 Place your power box to a midpoint between
the two ends of your pool and at least 11ft
from the edge of the pool.
5.9 Screw the nut of the floating cable firmly. Press the
switch on the side of the transformer to turn it on.
A blue light appears. To select the 1 Hour cleaning
cycle, press on the left side of the switch lying under
the blue light of the transformer. To select the 3 Hours
cleaning cycle, press on the left side of the switch.
Page 7
5.8 Place the robot i n your pool and wait until it is
completely submerged. If necessary, help it to
sink manually.
5.10 Press the on/ off button located at the top of
the case to activate your robot.
Blue+ orange lights = 1 H cleaning cycle enabled
Blue+ red lights
= 3 H cleaning cycle enabled
5.11 For optimal performance, place your robot
in the pool at the furthest possible location
from the power source.
This is the appropriate length of the cable
so that the robot can reach all of your pool.
Limit the length of cable in the pool to the
bare minimum, and place the surplus
outside the pool.
06 Climbing Walls
In order to be efficient while
cleaning the waterline, the
robot is designed to climb up
the waterline with the
orientation that offers the most
effective brushing.
It is therefore normal to see it
climb to the waterline only by
the side with the handle.
5.12 To turn off your robot, press the power
button and hold for 3 seconds.
Alternatively, you can also press the
switch located on the side of the box,
under blue light.
5.13 Do not remove your robot out of water
immediately after the end of its
cleaning cycle so as not to cause a
temperature shock.
5.14 When the cleaner is no longer used for an
extended period, screw on the
protective cap on the power supply and
store your robot indoors.
X
Page 8